A Detailed Description of the Flotation Cell Process

Flotation Machine, the main device in ore separating line, is mainly used for separating ferrous metals such as copper, zinc, lead, nickel, gold, and non-ferrous metals. It can also be used for separating non-metals like coal and fluorite. In the flotation process, after being mixed with drug, some qualified mineral attaches on bubble, floats on the surface of slurry and is scraped out, other mineral still stays in the slurry, so the separating purpose is finished.

The Process Flow of Flotation Cells:

(1) When flotation concentrator works, the impeller of the principal axis rotates by the driven of electric motor through the V belt and then produces centrifugal function resulting in negative pressure. On one hand, it intakes enough air to mix with slurry. On the other hand, it mixes slurry and medicine, fine the foam in order that the mineral can stick on the foam, and then it turns into mineral foam after floating on the slurry. Adjust the height of stopper to control fluid level in order that the available foam can be scrapped out by scrappers.

(2) The exploratory experiment and the agent after fully mixing into the first room, the flotation machine under the slot, rotating impeller, formed in the cavity in the round of negative pressure, making under the pulp and groove slot respectively by the impeller under the mouthpiece and on into the mouthpiece of the mixed zone, and also makes the air along the gas leading sleeve access of the mixed zone, pulp, air and elixir here mix. In the impeller under the action of centrifugal force, the mixed into the pulp mineralization zone, air to create bubbles and shatter, coal and grain full access, form the mineralization bubble, in the stator and turbulent board under the action of evenly distributed in slot section, and moving up into the separate area, enrichment to create foam layer, by scraping the bubble institutions eduction, forming plant bubble.

(3) Groove bottom is not above mineralization of coal will be through the cycle of holes and on the mouthpiece again mix, mineralization and separation. Under the slot is not part of the impeller inhaled pulp, through the buried in the pulp middlings in the second box of under room slot, and complete the first room after all the process, into the third chamber, the flotation machine so round and round, pulp through the last room to tailings discharge box eventually tailings.

If you want to buy ore beneficiation equipment, such as flotation cell, shaking separator, ore concentrator, gravity chute separator, and classifier, welcome to contact with Hongxing Machinery: sales@hxjq.com.

cell flotation: http://www.chinaquarry.com/products_show/flotation_machine.html

VN:F [1.9.15_1155]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.15_1155]
Rating: 0 (from 0 votes)

Leave a Reply

Get Adobe Flash playerPlugin by wpburn.com wordpress themes