Attention to the Operation of Hammer Crusher

Hammer crusher equipment is one of the most green devices promising, hammer mill crusher with low power consumption, high efficiency , complete model of the advantages it is widely pro-gaze. Applicable in the cement, chemical, electric power, metallurgy and other industrial sectors crushing medium hardness material , hammer crusher machine can completely replace the jaw crusher and counterattack crusher in stone processing industry, a one-time realization of finished material demand, reduce the cost of stone processing enterprises.

According to the structures of the equipment, the reasonable choice and lubrication materials are the main factors in the equipment maintenance. And we often adopt two kinds of lubrication oil such as grease and lubricating oil. And the grease are often applied in the dusty places with easy grease seal and bearing with no dust so the grease is the better choice to the hammer mill crusher.

Inspection and operation in the hammer crusher machine:

1. The operator should insist in three principles like using better, controlling better and fix better; and four abilities like better using ability, better maintenance ability, better inspection ability, better troubleshooting ability ;and also the four free principles like no dust, no sundries ,no oil founding and no loosing. And with all of the advantages, we can ensure the normal function to exert the better technical performance .

2. During the normal operation, we should not forcely start the equipment before we find out the trouble if there has happened the machine halt. And we can clean out the materials from the crushing cavity and to process the operation according to the sequence.

3. We should give a timely processing when there have happened the malfunction like abnormal sounds out of friction or beating between the hammer and grates .

4. After we shut down the hammering machine, we should also inspect the wearing condition of the hammer, inner plate and discharging grate. Besides, maintenance to the equipment is one of the key factors to extend the service life. And the normal maintenance are mainly including the cleaning equipment, bolts fasten, better lubrication, mechanical parts adjustment, which are very closely to the operation.

If you have any question about the quarry machine, welcome to consult Hongxing Machinery:

hammering machine:

VN:F [1.9.15_1155]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.15_1155]
Rating: 0 (from 0 votes)

Leave a Reply

Get Adobe Flash playerPlugin by wordpress themes