Jaw Crusher Working Principle

When the stone crusher works, the motor drives the rotor rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect,Gold Ore Crusher Equipment under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process will not stop till the material are crushed to the required size and then discharged from outlet.The stone crusher can crush many kinds of large, medium, small material such as rock or stone whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. And The stone crusher(impactor) is widely used in hydroelectricity, highway, artificial rock, stone and sand,Gold Magnetic Separator building materials, etc.The jaw crusher offers are ideal for primary and secondary crushing. Jaw Crusher is one of the main types of primary crushers in a mine or ore crushing process plant and also is one of the most widely used crushing equipments in mining industry. Yigong is a famous jaw crusher manufacturers in China, and sold crusher machines to all over the world. This series of jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. Because it is primary crusher, Jaw crusher is designed for long life service with minimum maintenance for hard, tough, abrasive material and overload high capacity

Jaw Crusher Working Principle
Primary jaw crusher is typically of the square opening design, and secondary jaw crusher is of the rectangular opening design. Jaw Crusher reduces large size rocks or ore by placing the rock into compression.Stamp Mill For Sale In South Africa A fixed jaw board, mounted in a “V” alignment is the stationary breaking surface, while the movable jaw exerts force on the rock by forcing it against the stationary plate. The space at the bottom of the “V” aligned jaw plates decide the crusher product size gap, or the size of the crushed product from the jaw crusher. The rock remains in the jaw until it is small enough to pass through the gap at the bottom of the jaws

VN:F [1.9.15_1155]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.15_1155]
Rating: 0 (from 0 votes)

Leave a Reply

Get Adobe Flash playerPlugin by wpburn.com wordpress themes