Lubricate bearings of Daswell diesel concrete mixer regularly

For new diesel concrete mixers, in the first use of 150 hours and 300 hours, concrete mixer users need replace engine oil once. Afterwards, replacing the engine oil once every 1000 hours. There are 2 conical mixing blades in the mixing drum.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:beton mixer,concrete pumping,diesel engine concrete mixer,We will provide you with the best product and service.

Compared with hydraulic diesel concrete mixer, there are kinds of lining boards: 3 kinds of circular lining boards self loading mobile concrete mixer, 3 kinds of end lining boards. These lining board are closely connected with mixing drum by using sunk screws.

There are two horizontal mixing shafts in the drum of compulsory concrete mixer. At the end of mixing arms, there are side blades to scrape concrete on the wall of mixing drum. Connections of mixing shafts and the mixing drum are equipped with special device to ensure the sealing quality.

Compulsory concrete mixer is equipped with special oil feeder. Keep the oil feeder clean when feeding lubricating grease. In order to ensure the normal operation of the mixing shaft mobile concrete mixer, users need often lubricate oil to the bearings.

VN:F [1.9.15_1155]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.15_1155]
Rating: 0 (from 0 votes)

Leave a Reply

Get Adobe Flash playerPlugin by wordpress themes